RODE Microphones M3 Manuel d'utilisateur télécharger pdf (Page 15)

- 15 -

Care and Maintenance

1. Like all electret condenser microphones, the

M3 should be kept dry at all times. The capsule

will be potentially subject to moisture during

vocal use, and we strongly recommend the use

of the foam windscreen (supplied with your M3)

during all vocal applications. This screen will also

minimise plosives (the high sound pressure levels

of pronounced B’s and P’s which can bottom-out

the capsule).

2. Although the M3 is a well-built, durable

microphone it is subject to damage. You should be

careful not to drop or knock it as this could cause

internal damage to the electrical components.

After use, the M3 should be wiped clean with

a soft cloth, and stored in its protective case

together with its accessories.

A pack of moisture absorbent crystals (silica gel/

desiccant) is provided with your mic, and should be

stored in the case with the mic. These crystals should

be blue and if they have turned pink they are no

longer active. To restore them, place the pack in an

oven set between 100-150

C until they return to their

original colour.

Note: There are no user serviceable parts inside

this microphone so there will never be a reason for

you to dismantle it (except to replace the battery).

Any service which may require dismantling must be

performed by an authorised

Service Agent.

1 2 ... 10 11 12 13 14 15 16

Pas de commentaire

RODE Microphones M3 Manuel d'utilisateur Page 15